Table of Contents
Advertisement
Model 4200-SCS Reference Manual
NOTE
Defining the plot properties of the graph: colors, line patterns, symbols, line widths
You define color, line pattern, plot symbol, and line width for a plot through the Data Series
Properties window. Open it as follows:
1.
2.
Figure 6-262
Data Series Properties window for the "vds-id" ITM
3.
4200-901-01 Rev. S / May 2017
• Major tick edit box: Specifies the spacings between the individual labels on the tab
specified axis and between the individual tick marks and grid lines, in terms of actual plot
units. If the Auto checkbox is not checked, you can specify the tick spacing manually. For
example if the X axis range is 5 V, you might specify 0.2 to space the labels and major
tick marks 0.2V apart.
• Tick per Major combo box: Specifies the number of ticks to be placed between the
major ticks on the tab specified axis. If the Auto checkbox is checked, the Tick per Major
combo box is automatically set to 1. Otherwise, you can manually set the Tick per Major
value from 1 to 4.
If you autoscale all axes simultaneously by selecting Auto Scale in the
Graph Settings menu, the Major tick is set to Auto momentarily during the scale
update, and the Major tick setting changes appropriately at the completion of the
autoscale operation. However, the manual Tick per Major setting is retained at the
completion of the autoscale operation.
In the Graph tab, display the Graph Settings menu by right-clicking on the graph or by
selecting Tools > Graph Settings.
In the Graph Settings menu, select Graph Properties > Series. The Data Series
Properties window appears. See
In the Data Series Properties window Series combo box, select the plot series for which you
desire to set properties (every Y1 and Y2 parameter for every series is listed). For the
vds-id graph there are four selections, as shown in
Return to
Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
Figure
6-262.
Figure
6-263.
6-223
Advertisement
Chapters
Table of Contents
