Keithley 4200-SCS Reference Manual page 831

Model 4200-SCS Reference Manual
Table 9-11 (continued)
KXCI command strings for scope card
Also see: Other
ZTEC function: SCP2:
Example: Query the vertical settings for Input Channel 1:
Readback commands: Advanced Trigger
Measurement Query,
Measurement Query
KXCI command: :SCOPE:MEAS?
Purpose: Queries the measurement settings
Returned values: method - Method used for the measurement. Entire Waveform uses the entire record. Gated only uses a
Also see: Other
ZTEC function: SCP2: zt450_measurement_query
Example: Query the measurement settings:
Output Trigger Query
KXCI command: :SCOPE:OUTPUT:TRIGGER? triggerOutput
Purpose: Queries the parameters for the selected output trigger.
Parameters: triggerOutput = 0
Returned values: state - State of the selected output trigger:
4200-901-01 Rev. S / May 2017
Readback commands,
zt450_vertical_query
SCP2HR: zt410_vertical_query
:SCOPE:VERT? 0
Return to
Output Trigger Query, Output Trigger Query
section of the waveform determined by the gate points/times:
0 = Entire
1 = Gated
gateStartTime - Start of the gate in seconds.
gateStopTime - End of the gate in seconds.
gateStartPoints - Start of the gate in points.
gateStopPoints - End of the gate in points.
edgeNumber - Edge used for a measurement.
referenceMethod - Reference levels in absolute voltages or relative percentages:
0 = Percent
1 = Voltage
lowReference - Returns the low reference level in volts or per unit.
midReference - Returns the mid reference level in volts or per unit.
highReference - Returns the high reference level in volts or per unit.
Readback commands: Advanced
SCP2HR: zt410_measurement_query
:SCOPE:MEAS?
Return to
PXI TTL0
= 1 PXI TTL1
= 2 PXI TTL2
Selects the output trigger to set up for output.
0 = Inactive
1 = Active
source - Event that causes an output trigger:
0 = Arm Event
1 = Trigger Event
2 = Constant State
3 = Operation Complete
Return to
Section 9: Keithley External Control Interface (KXCI)
Vertical
Scope commands list
Trigger, Measure
Scope commands list
= 3 PXI TTL3
= 4 PXI TTL4
= 5 PXI TTL5
Section Topics
Method, Measure Reference
= 6 PXI TTL6
= 7 PXI TTL7
= 8 External Trigger
9-85