Keithley 4200-SCS Reference Manual page 178

Section 6: Keithley Interactive Test Environment (KITE)
2. Add a Subsite Plan to the Project Plan as follows:
a. Do either of the following:
Figure 6-35
Add Subsite Plan button
Figure 6-36
Add New Subsite Plan to Project dialog box
b. Enter the name for the new Subsite Plan, subject to the following rules:
c. Click OK. The Subsite Plan is inserted below the selected component. See
Figure 6-37
Inserted Subsite Plan
6-52
• In the Project menu, click New Subsite Plan.
• On the Project Plan toolbar, click the Add Subsite Plan button. See
The Add New Subsite Plan to Project dialog box appears. See
• Any combination of alphanumerical characters, dashes, and underscores is allowed,
but no other special characters are allowed.
• No spaces are allowed.
• 260 characters, maximum, is allowed for the following combination: Subsite Plan
name plus all characters used in any directory path that includes the Subsite Plan
name.
Return to Section Topics
Model 4200-SCS Reference Manual
Figure 6-35.
Figure 6-36.
Figure
4200-901-01 Rev. S / May 2017
6-37.