Keithley 4200-SCS Reference Manual page 376

Section 6: Keithley Interactive Test Environment (KITE)
2. Select the desired text color. The Display Sample area displays the fit parameter text in the
selected color.
3. Click OK. The new fit parameter text color is displayed on the graph.
Changing background color of the displayed fit parameters
Change the background color for the displayed fit parameters as follows:
1. Under Color in the Graph tab Line Fit Properties window, click the scroll arrow on the
Background combo box. Several color selections are available; they are the same colors
for text color. For examples, see
2. Select the desired text background color. The Display Sample area displays the
background color. See
Figure 6-305
Example of fit parameters background color
3. Click OK. The new data variable background color is displayed in the graph.
NOTE
Adding/changing a border around the displayed fit parameters
You can add or change a border around the displayed fit parameters as follows:
1. Under Border in the Graph tab Line Fit Properties window, click the scroll arrow on the
Display Border combo box. Several border style selections are available, some of which
are shown in
Figure 6-306
Some of the available borders for displayed fit parameters
6-250
Figure
If you want other graph components to be able to shine through the normally opaque
background of the displayed fit parameters, select the Transparent checkbox on the
Color area of the Line Fit Properties window. However, be aware that a checked
Transparent checkbox:
overrides the background color selection (signified by a gray color in the Background
•
combo box).
causes a border to be displayed in gray scale.
•
For more about borders, refer to the following paragraph.
Figure 6-306.
Return to
Figure 6-304.
6-305.
Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017