Keithley 4200-SCS Reference Manual page 561

Model 4200-SCS Reference Manual
Changing the active user-library directory
The Keithley CONfiguration (KCON) program allows you to change the active user-library
directory, which is the directory that is accessed by KULT and KITE.
Change the active user-library directory as follows:
1.
2.
3.
Figure 8-45
KCON tab selections
4.
Figure 8-46
Active user-library directory in the KCON User Library Settings tab area
5.
Figure 8-47
Selecting a new user library directory
6.
4200-901-01 Rev. S / May 2017
Exit KITE and KULT if they are running (select File
Start KCON by double-clicking on the KCON icon or by selecting
> >
Start Programs Keithley
In the KCON window, single-click on the KI 4200 SCS node in the Configuration Navigator.
A series of tab selections appears. See
Single-click on the User Library Settings tab in the work area. The active user-library
directory is displayed, as illustrated in
Single-click on the Browse button next to the KITE / KULT User Library Directory field. The
Browse for Folder window appears, highlighting the active user-library (usrlib) directory.
See Figure 8-47.
In the Browse for Folder window, select the user-library directory (usrlib).
shows the Browse for Folder window after expanding the Joel user directory and
highlighting the corresponding usrlib directory.
Return to Section Topics
Section 8: Keithley User Library Tool (KULT)
>
Exit in each program).
>
KCON.
Figure 8-45.
Figure 8-46.
Active user-library directory
Figure 8-47
8-45