Keithley 4200-SCS Reference Manual page 285

Model 4200-SCS Reference Manual
Figure 6-185
Example of Project window
3.
NOTE
4200-901-01 Rev. S / May 2017
In the Project window, set the Start Execution at Site and the Finish Execution at Site
numbers as described in
In the Project window, the Number of Sites is set 1) typically, to specify the number
of sites that have been programmed in a prober controller; and 2) to automatically
limit the Finish Execution at Site setting. Therefore, the Finish Execution at Site
setting must be less than or equal to the Number of Sites setting.
Return to Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
Figure 6-186.
6-159