Keithley 4200-SCS Reference Manual page 351

Model 4200-SCS Reference Manual
6.
Figure 6-266
Some of the plot-color selections
7.
8.
9.
4200-901-01 Rev. S / May 2017
In the Color combo box, select a special line color for the plot line if desired.
shows some of the available non-black line colors.
In the Width combo box, select the line width for the plot line if desired. The line width is
variable between 1 and 9 screen pixels (the default is one pixel).
As needed, repeat steps 3 through 7 for each plot on the graph.
Click OK. The graph reflects the new plot line definitions.
See the following examples:
• Figure 6-267 shows the vds-id plot lines with variable line patterns, set through the
Pattern combo box.
• Figure 6-268 shows the vds-id plot lines with plot symbols, set through the Shape combo
box.
• Figure 6-269 shows the vds-id plot lines colored through the Color combo box.
• Figure 6-270 shows the colored vds-id plot lines changed to 2-pixel width through the
Width combo box.
Return to Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
Figure 6-266
6-225