Keithley 4200-SCS Reference Manual page 331

Model 4200-SCS Reference Manual
Figure 6-242
Example of an unconfigured graph tab
The vds-id ITM is one of the ITMs that comes installed on your Model 4200-SCS with sample data,
including a configured graph
purposes through much of Section 6, including construction of the u_build project
completely new Project Plan earlier in this
shown in multiple places, including at the beginning of this section. In
installed configuration has been intentionally removed but will be restored while illustrating Graph
tab features in the
Accessing the Graph tab windows
Several Graph tab windows control the properties of a graph. You can access these windows two
ways, as follows:
Opening the Graph Settings menu
Open the Graph Settings menu by either of the following methods:
4200-901-01 Rev. S / May 2017
Displaying and analyzing data using the Sheet tab.
• By using the Graph Settings menu: When first defining a graph, you typically access all
Graph tab windows using the Graph Settings menu. Therefore, the next two subsections
first tell how to open the Graph Settings menu. Then they overview each item on the menu,
thereby summarizing the capabilities of the Graph tab.
• By right-clicking on certain graph components: When certain graph components are
already displayed, you can open context-appropriate edit windows by right-clicking on the
components. Applicable graph components include titles, legends, comments, numerical
coordinates, and values displayed through the Data Variables menu item.
• Menu access method I: Right-click in any blank portion of the Graph tab (any place except
on a Graph tab component). The Graph Settings menu appears as a pop-up menu. See
Figure 6-243.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
(Figure 6-7). The "vds-id" ITM has been used for illustration
section). The Definition tab for the "vds-id" ITM is
Section Topics
(Building a
Figure 6-242, the as-
6-205