Ptx5000 Installation Overview; Overview Of Installing The Ptx5000 - Juniper PTX5000 Hardware Manual

PTX5000 Installation Overview

IN THIS SECTION

Overview of Installing the PTX5000 | 197

PTX5000 Installation Safety Guidelines | 198
Overview of Installing the PTX5000
You must proceed through the installation process in the following order:
1. Prepare the installation site for the PTX5000.
See "Overview of Preparing the Site for the PTX5000" on page
2. Review all safety guidelines and warnings for the PTX5000.
WARNING: To avoid harm to yourself or the PTX5000 as you install and maintain it,
you must follow the safety procedures for working with routers, as well as the
guidelines and warnings for working with and near electrical equipment. However,
providing an exhaustive set of guidelines for working with electrical equipment is
beyond the scope of this documentation.
See "PTX5000 Installation Safety Guidelines" on page
3. Unpack the PTX5000 and verify the parts received.
See "Overview of Unpacking the PTX5000" on page
4. Install the mounting hardware for your rack.
• See "Installing the PTX5000 Mounting Hardware for an Open-Frame Rack" on page
• See "Installing the PTX5000 Mounting Hardware for a Four-Post Rack or Cabinet" on page
5. Install the PTX5000 using a mechanical lift.
See "Overview of Installing a PTX5000 Using a Mechanical Lift" on page
6. Ground the PTX5000.
See "Connecting the PTX5000 to Earth Ground" on page
7. Connect the PTX5000 to external devices.
160.
198.
200.
213.
220.
197
211.
206.