Ptx1000 Installation Overview; Overview Of Installing The Ptx1000 - Juniper PTX1000 Hardware Manual

PTX1000 Installation Overview

IN THIS SECTION

Overview of Installing the PTX1000 | 73

PTX1000 Installation Safety Guidelines | 74
Overview of Installing the PTX1000
You can mount a PTX1000 flush with the front of a 19-in. four-post rack. Use the standard mounting
brackets provided with the PTX1000 for this configuration.
Before you begin to install and connect a PTX1000, ensure that you have reviewed the information in
"PTX1000 Installation Safety Guidelines" on page
To install and connect a PTX1000:
1. Unpack the PTX1000 and verify the components received. See
2. Mount the PTX1000 in a rack. See
3. For installations that require a separate grounding conductor to the chassis, follow the instructions in
"Connecting the PTX1000 to Ground" on page
4. Connect the PTX1000 to power. Depending on your configuration, follow the instructions in
AC Power to the PTX1000" on page 82
5. Connect the PTX1000 to a management console for initial configuration. See
to a Management Console" on page
6. Initially configure Junos OS following the instructions in
for the PTX1000" on page
SEE ALSO
PTX1000 Site Preparation Checklist | 50
74.
"Mounting the PTX1000 in a Rack" on page
81.
or "Connecting DC Power to the PTX1000" on page
90.
92.
"Unpacking the PTX1000" on page
76.
"Connecting the PTX1000
"Performing the Initial Software Configuration
73
75.
"Connecting
85.