Table of Contents
Advertisement
Controls:
Symbol
a
b
h
c
i
d
e
f
g
Indicators:
Symbol
j
S
Controls & Indicators
Description
ON/OFF button - Press once to switch the pump ON. Press and hold down for 3
seconds to switch the pump OFF. Note: Pump can only be switched OFF at specific
stages of operation, see 'Power Down Sequence' section in Configured Options for
further details.
RUN button - Press to start the infusion. The green LED will flash during infusion.
HOLD button - Press to put the infusion on hold. The amber LED will be lit while on
hold.
MUTE button - Press to silence alarm for 2 minutes (configurable). Press and hold
until 3 beeps are heard for 15 minutes silence.
PURGE/ BOLUS button - Press to access PURGE or BOLUS soft keys. Press and hold
down soft key to operate.
PURGE the extension set during set up.
Pump is on hold
Extension set is not connected to the patient
Volume Infused (VI) is not added
BOLUS - fluid or drug delivered at an accelerated rate.
Pump is infusing
Extension set is connected to the patient
VI is added
OPTION button - Press to access optional features (see Basic Features).
PRESSURE button - Use this button to display the pumping pressure and alarm
level.
CHEVRON keys - Double or single for faster/slower increase or decrease of values
shown on display.
BLANK SOFTKEYS - Use in conjunction with the prompts shown on the display.
Description
BATTERY indicator - When illuminated the pump is running on the internal battery.
When flashing the battery power is low with less than 30 minutes of use remaining.
AC POWER indicator - When illuminated the pump is connected to an AC power
supply and the battery is being charged.
1000DF00005 Iss. 2
8/44
Advertisement
Table of Contents
