Selecting New Patient And Profile Options - Cardinal Health Alaris Directions For Use Manual

Adjusting Display Contrast (Continued)
2. To adjust display for optimum viewing, use Lighter/Darker
soft keys.
3. To return to main screen, press CONFIRM soft key.

Selecting New Patient and Profile Options

The following procedures assume the Profiles feature is
enabled.
1. Select required
• To indicate programming is for a new patient and clear
all stored patient parameters from memory, press Yes
soft key.
OR
• To confirm programming is for same patient and retain
all stored patient parameters, press No soft key.
♦ Last used profile displays.
2. Accept or change current profile:
• To accept current profile, press Yes soft key.
♦
Main screen appears.
• To change profile, press No soft key and continue with
next step.
♦ Profile selection screen appears.
Alaris ® System (with v9 Model 8000) DFU
PC Unit Section
Start-Up (Continued)
option.
NEW PATIENT?
System Options
Display Contrast
Guardrails Suite MX (v8) ®
Lighter
Darker
©2001-2005 Cardinal Health, inc.
or one of its subsidiaries. All rights
reserved. Guardrails® is a registered
trademark of Cardinal Health, inc. or
one of its subsidiaries.
>Adjust Display to
Desired Contrast
CONFIRM
Midtown Hospital
NEW PATIENT ? Yes
"Yes" Clears Previous
No
Patient Data
>Select Yes or No
DISPLAY
CONTRST
Midtown Hospital
Adult ICU
Adult ICU ? Yes
"Yes" Confirms Same
No
Profile
>Select Yes or No
General Setup and Operation
1-7