Table of Contents
Advertisement
Operating Instructions
This section describes the procedures for using the InPower™ Personal Medication System on a regular basis,
including loading and dispensing medications, discontinuing a medication, taking your medication at any time,
and working with your health information.
Load a New Medication
To load your device for the first time, see the instructions in the
Setup Instructions > Device Setup section of this document.
When you are prescribed a new medication, and pick up
your new medication pod from your pharmacy, you need to
load it into the InPower™ Personal Medication Assistant.
CAUTION: Do not take or remove any medication
from the pod until you have loaded it into
the device.
1. From the front left of the device, open the door
and input your PIN if necessary.
The screen turns on. The Home Screen displays.
2. Tap Medications.
The Medication List Screen displays.
3. Tap Add new medication +. You may need to
scroll to the end of your medication list to access
this button.
The next available pod tray opens. A prompt to load
the medication displays.
Note: If you prefer to load your new medication at
another time, tap I'll load a pod later.
Medication List Screen
16
Advertisement
Table of Contents
