Safety; Basic Safety Information; Prerequisites; Connecting The Unit - Sirona Cerec AC Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions CEREC AC
63 33 582 D3492
D3492.201.01.22.02 10.2018
4

Safety

Basic safety information

4.1
4.1.1

Prerequisites

NOTE
Important information on the building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies
in Germany.
NOTE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
4.1.2

Connecting the unit

Perform connection by following the directions given in the present
operating instructions.
4.1.3

General safety information

CAUTION
Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken),
prevent any leaking liquid from coming into contact with your skin,
mucous membranes (eyes, mouth), or foodstuffs and be careful not to
inhale any escaping vapors.
Rinse any parts of your body or items of clothing already
contaminated by the liquid with ample amounts of water and soap.
CAUTION
Note on the prevention, recognition, and elimination of unintended
electromagnetic effects:
The CEREC AC acquisition unit is Class B equipment (classified
according to CISPR 11, EN 60601-1-2: 2007 based on IEC
60601-1-2:2007 and A1:2004).
This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.
4 Safety
4.1 Basic safety information
11