Safety; Basic Safety Information; Prerequisites; Connecting The Unit - Sirona CEREC AC Connect Operating Instructions For The Acquisition Unit

4 Safety

10
Operating Instructions for the Acquisition Unit CEREC AC Connect
4
Safety

Basic safety information

4.1
4.1.1

Prerequisites

NOTE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
4.1.2

Connecting the unit

Perform connection by following the directions given in the present
operating instructions.
4.1.3

General safety information

CAUTION
Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken),
prevent any leaking liquid from contacting your skin, mucous
membranes (eyes, mouth) or foodstuffs and be careful not to inhale
any escaping vapors.
Rinse any parts of your body or items of clothing already
contaminated by the liquid with ample amounts of water and soap.
CAUTION
Note on the prevention, recognition and elimination of unintended
electromagnetic effects:
The CEREC AC acquisition unit is Class B equipment (classified
according to CISPR 11, EN 60601-1-2: 2007 based on IEC
60601-1-2:2007 and A1:2004).
This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.
NOTE
Install only approved software
To prevent interference with the runtime reliability of the program,
only approved software may be installed.
Sirona Dental Systems GmbH