Safety; Basic Safety Information; Prerequisites; Connecting The Unit - Sirona Cerec AC Operating Instructions Manual

4 Safety

4.1 Basic safety information

10
Operating Instructions for the Acquisition Unit Sirona Dental CAD/CAM System
4
Safety
Safety
4.1
Basic safety information
Basic safety information
4.1.1

Prerequisites

Prerequisites
NOTICE
Important information on the building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies in
Germany.
NOTICE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTICE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
4.1.2

Connecting the unit

Connecting the unit
Description
Perform connection by following the directions given in the present
operating instructions.
4.1.3

General safety information

General safety information
CAUTION
Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken), prevent
any leaking liquid from contacting your skin, mucous membranes (eyes,
mouth) or foodstuffs and be careful not to inhale any escaping vapors.
Rinse any parts of your body or items of clothing already contaminated
by the liquid with ample amounts of water and soap.
Sirona Dental Systems GmbH
63 33 582 D3492
D3492.201.01.09.23 09.2011