Safety; Basic Safety Information; Prerequisites; Connecting The Unit - Sirona Cerec 3 Operating Instructions Manual

4 Safety

Basic safety information

Warning on inEos in connection with acquisition unit
10
4
Safety
4.1 Basic safety information
4.1.1

Prerequisites

NOTE: Important info on Building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies in
Germany.
NOTE: Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
CAUTION: Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
4.1.2

Connecting the unit

Perform connection by following the directions given in the present operating
instructions.
WARNING:
As long as an inEos is connected to an acquisition unit, no exposures may be
taken in the patient's mouth using the connected CEREC 3D camera.
4.1.3

General safety information

WARNING: Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken), prevent any
leaking liquid from contacting your skin, mucous membranes (eyes, mouth)
or foodstuffs and be careful not to inhale any escaping vapors.
Rinse any parts of your body or items of clothing already contaminated by the
liquid with ample amounts of water and soap.
CAUTION:
Note on the prevention, recognition and elimination of unintended
electromagnetic effects:
The CEREC 3 acquisition unit is a Class B device (classified according to
CISPR 11, EN 60601-1-2: 2001 based on IEC 60601-1-2).
This system may be operated in a residential area provided that it is used
under the responsibility of a medical specialist.
Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit CEREC 3
D 3344.201.01.25.23 01.2011
63 22 700 D 3344