Connecting The Suction Device (Optional) - Sirona CEREC MC Operating Instructions Manual

5 Installation and startup
5.4 Commissioning
24
Search for unit manually
The unit is connected to the PC via a LAN cable or via WLAN.
1. Click the
2. Click on the
3. Click on the
4. Set the network.
5. Enter the network address which appears on the
display once the milling and grinding unit has been switched on.
6. Click on the
 The software attempts to contact the device.
If the connection fails, check the connection. If necessary, ask a qualified
technician.
Unit removal
✔
If you no longer require a unit (e.g. a unit is replaced), you can remove
it.
✔
The unit is operation.
1. Click the
2. Click on the
3. Click on the unit that you wish to uninstall.
4. Click on the
 You will be asked if you would like to remove the unit.
5. Click on the
 The device is removed.
5.4.7.4

Connecting the suction device (optional)

5.4.7.4.1 Connecting the suction tube
Operating Instructions (valid for USA) Sirona Dental CAD/CAM System
"Configuration"
button in the system menu.
"Devices"
button.
"Add Device (Manual)"
"Ok"
button.
"Configuration"
button in the system menu.
"Devices"
button.
"Delete Device"
button.
"YES"
button.
Dentsply Sirona
button.
"IP address:"
63 98 650 D 3439
D 3439.201.07.10.23 10.2017