Points To Note When Replacing The Scanning Lamp; After Replacing The Scanning Lamp - Canon iR8500 Servise Manual

Hide thumbs Also See for iR8500:

Table of Contents

CHAPTER 5 MAINTENANCE AND INSPECTION

5.1.2 Points to Note When Replacing the Scanning Lamp

Wait until the scanning lamp has cooled

before starting the work.

Do not leave fingerprints on the surface

of the scanning lamp.

If the surface of the scanning lamp is

soiled, dry-wipe it.

When mounting the scanning lamp

heater to the scanning lamp, be sure to

use the reference marking (i.e., the con-

nector of the heater must be to the front

of the machine).

When mounting the scanning lamp to

the machine, take care not to touch the

area where light is let through.

When mounting the scanning lamp, be

sure that the text/marking is to the up-

per front of the machine.

Chapter 6 "Troubleshooting">2.7.3 "Af-

ter Replacing the Scanning Lamp"

4 mm (approx.)

Light-emitting

Upper : 6 to 7mm (approx.)

Light-emitting

2000 2000 2000 2000

CANON iR8500 REV.0 MAR. 2001