Transfer Belt Unit; Points To Note When Replacing The Transfer Belt - Canon CLC5000 Service Manual

2.6 Transfer Belt Unit

2.6.1 Points to Note When Replacing the Transfer Belt

• Avoid touching the surface of the trans-
fer belt (particularly, the area coming
into contact with paper).
If the transfer belt is soiled, wipe it with
a moist cloth (or a cloth moistened with
alcohol). Be sure that the belt is com-
pletely dry before installing it to the
machine.
• If you have removed the transfer belt or
replaced it, be sure to initialize the
transfer belt swing data after the work
by executing 'FUNC MISCp E075-
RLS' in service mode. For instructions,
see 2.6.2 Initializing the Transfer Belt
Swing Controller Data.
• When installing the transfer unit, check
to make sure that the bearing is securely
in the transfer assembly frame rear sup-
port plate.
COPYRIGHT © 2001 CANON INC.
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
2000 2000 2000 2000
[10]
[9]
CANON CLC5000 REV.0 JAN. 2001
F05-206-01
5-31