Points To Note When Replacing The Scanning Lamp - Canon iR8500 Service Manual

CHAPTER 2 NEW FUNCTIONS
8) Disconnect the connector[2] from the
inverter PCB[1].
Use a screwdriver and remove the rivet
[3] out of the hole on the top of the
frame. The remove the cable retainer
plate [4].
When mounting the scanning
lamp, be sure to hook the cable
[1] on the pulley [3] of the No.
2 mirror base [2] without twist-
ing it.

3.9.3 Points to Note When Replacing the Scanning Lamp

• Do not work while the scanning lamp is hot.
• Do not leave fingerprints on the surface of the scanning lamp.
• If the surface of the scanning lamp is soiled, dry wipe it.
• Do not touch the light window of the scanning lamp, as when mounting
it.
• Do not subject the scanning lamp to impact.
• If the lamp fell, do not mount it back regardless of its condition (cracking
can occur).
2-60
COPYRIGHT © 2001 CANON INC.
[1]
F02-309-04
[3]
F02-309-05
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[2]
[3]
[4]
[1]
[2]