Exit - Allied Telesis x310-26FT Command Reference Manual

CLI N C
AVIGATION OMMANDS

EXIT

exit
Overview This command exits the current mode, and returns the prompt to the mode at the
previous level. When used in User Exec mode, the exit command terminates the
session.
exit
Syntax
Mode All command modes, including Global Configuration and Interface Configuration
modes.
Example The following example shows the use of the exit command to exit Interface mode,
and return to Configure mode.
awplus#
awplus(config)#
awplus(config-if)#
awplus(config)#
Related disable (Privileged Exec mode)
Commands
enable (Privileged Exec mode)
end
C613-50103-01 REV A
configure terminal
interface vlan2
exit
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
95