Table of Contents
Advertisement
F
C
M
ILE AND
ONFIGURATION
ANAGEMENT
-
BOOT CONFIG
FILE BACKUP
boot config-file backup
Overview
Use this command to set a backup configuration file to use if the main
configuration file cannot be accessed.
Use the no variant of this command to remove the backup configuration file.
Syntax
boot config-file backup <filepath-filename>
no boot config-file backup
Mode
Global Configuration
Usage
For an explanation of the configuration fallback order, see the
Feature Overview and Configuration
To set the configuration file backup.cfg as the backup to the main
Examples
configuration file, use the commands:
awplus#
awplus(config)#
To remove the configuration file backup.cfg as the backup to the main
configuration file, use the commands:
awplus#
awplus(config)#
Related
boot config-file
Commands
boot system
boot system backup
show boot
C613-50103-01 REV A
C
OMMANDS
Parameter
<filepath-filename>
backup
configure terminal
boot config-file backup flash:/backup.cfg
configure terminal
no boot config-file backup flash:/backup.cfg
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Filepath and name of a backup configuration file.
Backup configuration files must be in the Flash filesystem.
Valid backup configuration files must have a . cfg
extension.
The specified file is a backup configuration file.
Guide.
File Management
106
Advertisement
Table of Contents
