Advertisement
Use
Router functions
Four-way routing
BBMD
Web server
MS/TP Slave Proxy
SNMP v2
BACnet NAT
BACnet/IP to BACnet/IP
2 / 10
Siemens
Building Technologies
The PXG3... BACnet router connects a BACnet/IP network to a BACnet/LonTalk
network (PXG3.L only), and/or a BACnet MS/TP channel. BACnet objects are
transmitted simultaneously throughout any and all networks.
The PXG3... BACnet router transmits BACnet protocol between a BACnet/IPv4
network, a BACnet/IPv6 network, a BACnet/LonTalk network (PXG3.L only), and a
BACnet MS/TP channel. BACnet objects are simultaneously transmitted thoughout
any and all networks.
Broadcast Management Device, used to distribute BACnet Broadcast messages
across IP Routers.
The BACnet router includes a Device Object and can be operated by a BACnet
Client. Present operating state, date and time as well as statistics on sent
packages can be viewed via web server.
The BACnet router can serve as a Slave Proxy for slaves that are connected to its
MSTP port. In other words, it responds to Who-Is messages on the slaves' behalf
by sending an I-Am message.
Simple Network Management protocol MIB-2, for monitoring and diagnosing the
BACnet router network interface.
Supports setup of a BACnet network over a NAT device. Additionally, remote
access from a public network to BACnet devices is possible on a private network.
Important: the public IP address must be static.
For security reasons we recommend using VPN tunneling with BACnet NAT.
For details see standard 135-2012 Annex J.
When routing between BACnet/IP and BACnet/IP on one IP network, the BACnet
router address must be the same on both BACnet networks. The difference is that
different BACnet UDP ports are used on the BACnet network.
PXG3...
BACnet router for Ethernet - LONWORKS - MS/TP
CM1N9270en_10
2017-10-16
Advertisement
