16.7 RFID
16.7
ESC+RK RFID write(ISO/IEC15693)
RFID Write(ISO/IEC15693)
Command
ESC
HEX code
<1B>
16
Default Value
Nil
When turning off the power switch
Valid range and
term of
Valid range within item
command
Valid range between items
[Function]
Specifies the data to write on RFID tag that supports ISO/IEC15693.
[Format]
[Standard format]
<RK>a,(b,)Dmmmm,n~n(,iso:c)(,wsb:sss)(,lbs:xxx,lbn:yyy)(,eas:v)(,afi:ww)(,dsf:xx)(,eal:g)(,afl:h)
(,dsl:i) (,eap:jjjjjjjj)(,eai:kkkk)(,pw0-4:eeeeeeee)(,aw0-4:ffffffff)(,kpw:gggggggg)(,pps:lll,m)(,fsw:f)
[Conventional format]
<RK>a,(b,)Dmmmm,n~n(,Ws:sss)(,Ls:xxx,Ln:yyy)(,Ea:v)(,Af:ww)(,Ds:xx)(,Al:h)(,Dl:i)(,Fs:f)
[Conventional format] is meant for the compatibility with models prior to CL4NX. For CL4NX and models onwards,
create with [Standard format] when using commands as new parameters.
●Parameter
Specification of inlet type
Valid range for models with Takaya module:2,3,5
2:ICODE
3:Tag-it
a
5:my-d
Note: A tag error occurs when data exceeds the maximum number of bytes for each product.
Ignore RFID tag error (omissible)
Valid range:0~9
0: Unspecified
This mode stops every time a tag error occurs.
1~9: Specify how many labels to ignore for RFID tag error
b
When tag error occurs, retries with next label up to the maximum number of labels to ignore. With this mode,
printer stops when a series of tag errors occur that exceeds the specified number of errors.
Note:If this parameter is omitted, the number of retries set under the menu Interfaces-> RFID->Retries ([DC2]PA's
identifier IF, MAX_RETRY_LABEL) is applied instead
Parameter
RK
See under "Parameters".
<52>
<4B>
16
16
The set command is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Product
ICODE SLI
ICODE SLIX
ICODE SLIX-S
Product
Tag-it HF-I Plus
Tag-it HF-I Pro
Tag-it HF-I Standard
Product
my-d vp SRF55V10P(custom)
my-d vp SRF55V10P(ISO)
336
ESC+RK
Maximum number
of bytes
112
112
160
Maximum number
of bytes
256
32
32
Maximum number
of bytes
1000
992