Esc+F Epc Sequential Number(Uhf) - SATO CL4NX Programming Reference Manual

16.2 RFID
16.2

ESC+F EPC Sequential Number(UHF)

EPC Sequential Number(UHF)
Command ESC
HEX code <1B>
16
Default Value Nil
When turning off the power switch
Valid range and
term of Valid range within item
command
Valid range between items
[Function]
This command is set before EPC code write (<IP0> command), and is used to write the sequential number of the
specified data.
[Format]
<F>aaaabcccc(,dd,ee,f)
●Parameter
aaaa "Number of printing for the same contents" = Valid range
b "Increment/decrement setting"
cccc "Increment/decrement value setting"
dd "Sequential numbering digits"
ee "Lower disabled digits"
f "Decimal or HEX serial number"
[Coding Example]
Number of printing for the same contents: 1, Increment/Decrement:+, Increment/decrement value: 1,
Sequential numbering digits: 5, Lower disabled digits: 0
<A>
<V>100<H>100<P>2<L>0202
<F>1+1, 5, 0<IP0>e:h,epc:0123456789ABCDEF1200000;
<Q>2
<Z>
[Supplemental explanation]
1. The EPC sequential number location in one item is one location.
2. Inverse printing <(> of the sequential number data cannot be used.
3. Automatic line feed <E> cannot be used.
4. EPC sequential numbering is enabled only if specified immediately before EPC code write (<IP0> command).
5. This command cannot be used in items that include the <TU> command.
F Parameter
<46> aaaabccc(,dd,ee,f)
16
The set command is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= + : Addition
- : Subtraction
= Valid range
= Valid range
= Valid range
= 0 :
1 :
324
ESC+F
: 1 to 9999
: 1 to 9999
: 1 to 24 24 if omitted (can be omitted)
: 0 to 99 0 if omitted (can be omitted)
Decimal 0 if omitted (can be omitted)
HEX