Dc2+Pj Rifd Reed(Iso/Iec14443 Typea) - SATO CL4NX Programming Reference Manual

17.12
Common Commands
for All Languages
17.12
DC2+PJ RFID read
TypeA)
(ISO/IEC14443 TypeA)
Command
DC2
HEX code
<12>
16
Default Value
None
When turning off the power
switch
Valid range and
Valid range
term of
Printer operation in
command
progress
Error
[Function]
The data of the RFID tag corresponding to ISO/IEC14443 Type A is sent back to the host.
[Format]
[DC2]PJ,aa(,aa),bb
[Parameters]
Symbol Parameter name
Identifier
a
Options identifier
b
[Return data format (normal)]
[STX]a...a,b...b[ETX]
[Return data]
Symbol Parameter name
Total number of data byte
*This is the total number of bytes after
parameter b. The delimiting comma between
parameters a and b, and the ETX are not
a
included.
*Data input and output form is which case of
ASCII or HEX, but, as for the unit, the value
becomes same for a byte.
b
Memory data
[Return data format (when a command error occurs)]
[NAK]<15>16
[Exception processing]
Parameter name
Identifier
Terminology
Command error
RIFD Reed(ISO/IEC14443
PJ Parameter
<50> <4A> ,aa,bb
16 16
The command cannot be received during the printer operation.
([NAK] return)
Commands can be received even if an error is occurring.
Valid range
N1：USER data
N2：UID data
NA：All data(USER data＋UID data)
NO：No option identifier
（When identifier N2 is specified, it uses it.The
user data becomes ASCII expression if it uses it
when identifier N1 is specified.）
AS：Data output form = ASCII
HX：Data output form = HEX
*When the user data is sent back,it is reflected.
Exception condition
A value outside the range is specified
Command error
Description
The data received after a command error is determined is not
considered as a parameter of this command.
453
DC2+PJ
Acquisition method
Refer to
"Coding sample" below.
Two characters fixed
acquisition
Valid range
Data size from the first memory data item
until before [ETX]
Maximum 4 digits
Refer to "Return status format" below.