Esc+~A Cut Number Unit - SATO CL4NX Programming Reference Manual

12.10 System
12.10

ESC+~A Cut Number Unit

Cut Number Unit
ESC
Hexadecimal
code <1B>
16
Initial value aaaa=1
When the power switch is OFF
Valid range and
Valid range within items
term of
Valid range between items
command
[Function]
Cuts labels at a specified interval in a print job.
[Format]
<~A>aaaa
●Parameter
a [Number of labels between each cut]
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<~A>2
<Q>7
<Z>
2 pcs
[Supplementary Explanation]
1. Valid only for cutter models.
2. If the parameter is not specified by this command <~A>, each label will be cut after being printed.
3. In case the parameter "a" is set to 0, no label will be cut.
4. Set this command before <Q> command.
5. This command may not be used in combination with other cut commands<~>.
~A
<7E> <41>
16 16
= Valid range
Cut Cut
7 pcs
Feed direction
Parameter
aaaa
The set parameter is maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
: 0 to 9999
1 label left
Cut Cut
260
ESC+~A