SATO CL4NX Programming Reference Manual page 588

Hide thumbs Also See for CL4NX:

Table of Contents

1.The external signal may be insufficient for a period of approx. one second from the time the power is turned ON. Therefore,

perform control after waiting for at least one second.

2.When the conditions shown in "Details" are satisfied, the signal is set to the status shown in "Level".

Example 1) When paper end occurs for pin No. 1, the level becomes Low, and at that time, the contact is set to ON, and

currentstarts flowing.

Example 2) The print start signal of pin No. 5 is set to a Low level when print start is requested, and the current starts

[Supplemental explanation]

The corresponding relationship between the pin No. and signal name (details) can be changed in the

Printing/Advanced/Extio Signals screen.