Bluetooth; Basic Specifications - SATO CL4NX Programming Reference Manual

7 Bluetooth

Bluetooth interface of the printer complies with Bluetooth Ver.3.0 standard.
7.1

Basic Specifications

Item
Standards
Communication distance
Used profile
Operation mode
Security level
PIN code
Device name
Power Save Mode
CRC ENABLE/DISABLE
Disconnection timeout
period
(SPP layer)
Disconnection timeout
period
(LMP layer)
Parameter
Receive buffer size
Pairing
CoD
(Class of Device)
Supervision timeout
*1 A method that connects 2 Bluetooth supported devices by establishing virtual serial port is defined.
.
Bluetooth Ver. 3.0+EDR Power Class 2
10m (at the standard measurement environment)
Serial Port Profile（SPP）
Slave mode
Level 1 No authentication
Level 2-1 No PIN code authentication, service level, encryption
Level 2-2 With PIN code authentication, service level, encryption
Level 3 No PIN code authentication, link level, encryption
Level 4 With secure simple pairing support, service level,
encryption
0 to 16 ASCII code specification (20H, 21H, 23H - 7EH)
Default Value: 0000
0 to 53 ASCII code specification (20H, 21H, 23H - 7EH)
Default value: SATO PRINTER_xxxxxxxxxxxx
sniff, park, hold (operates according to the host setting)
CRC: ENABLE
DISABLE (Default)
0 sec. (default value)
60 sec. (default value)
Setting Items
Protocol
2.95 MB
0
Near full
Near full
Save the link key for 10 devices
Major service class: Not specified
Major device class: Imaging major class
Minor device class: Printer
Default = 20 seconds (configurable at the host)
Description
Status 3
Status 4 (default value)
None
564
(xxxxxxxxxxxx is BD address）
Setting range
2.95 MB
0.95 MB
1.95 MB
*1