Explanation Of Input/Output Signal - SATO CL4NX Programming Reference Manual

8.3

Explanation of input/output signal

1) Input signal
Item
Print Start
(PRIN)
Reprint
(PRIN2)
Print operation
Print complete
(PREND)
Print Start
(PRIN)
Reprint
(PRIN2)
Print operation
Print complete
(PREND)
Print Start
(PRIN)
Reprint
(PRIN2)
Print operation
Print complete
(PREND)
[Supplemental explanation]
1. Keep the print start signal (PRIN) to "Low" until print completion signal (PREND) is output.* (Refer to [Maintaining
the print start signal (PRIN)] below.) Also, output the reprint signal (PRIN2) for 10 msec or more. When signal is
output for shorter than 10 msec, and reprint signal is not acknowledged, the printer will not reprint.
2. If NULL cut specified not output print end signal (PREND).
Input waveform
1
2
3
4
1
2
3
4
10 msec or more
1
2
3
4
581
Single print complete
20 msec
Single print complete
20 msec
Single print complete
20 msec