SATO CL4NX Programming Reference Manual page 261

[Supplementary Explanation]
1. If using the label smaller than the head width, use this command for specifying the label size and adjust the start
point position corresponding to the label size.
2. For specifying the label size, include the size of backing paper.
(
Side alignment, 8dots/mm)
(Center alignment,8dot/mm)
Start point
1
Value inside ( ) is 12 dots/mm
Start point
1
1
Label
80mm x100mm
80mm
640 dots
(960dots)
167.5mm
1340 dots
(2010dots)
Value inside ( ) is 12 dots/mm
1
100mm
Label
800dots
80mm×100mm
(1200dots)
80mm
640dots
(960dots)
112mm
896dots
(1344dots)
253
100mm
800 dots
(1200dots)
1249mm
9992dots
(14988dots)
600mm
4800dots
(7200dots)