Abnormal End When Crc Check Is Enabled - SATO CL4NX Programming Reference Manual

Abnormal end when CRC check is enabled

7.7.4
7.7.4.1 When a CRC error occurs (common to Status 3 and 4)
CONNECT
[Note]
The printer will clear the print data and will not return ACK/NAK when the received data has CRC error.
7.7.4.2 When a disconnection timeout occurs (common to Status 3 and 4)
CONNECT
[Note]
When there is no data come in to the printer during print command reception for communication time out period
(10 sec), the printer will time out and clear the partly received print command.(ACK/NAK will not be returned.)
Host
Print command (STX-ETX CRC)
ID number = [05]
Print q'ty = 50
Job name = [SATO]
CRC abnormal data
Host
Print command (STX-ETX CRC)
ID number = [05]
Print q'ty= 50
Job name = [SATO]
Disconnected
or communication
failure
Printer
Receive/Analysis/Edit
*The printer operation is determined by the key
operation or by commands. Please refer to 7.6 CRC
error display.
Printer
Receive/Analysis/Edit
×
The disconnection timeout period has elapsed
* Clear the halfway received print command.
577