SATO CL4NX Programming Reference Manual page 444

No Description
5 Error No. *1
Printer status information
name
EN
436
Printer status information data
00:Online *Not an error. Return is
performed
01:Offline *Not an error. Return is
performed
02: Machine error
03: Memory error
04: Program error
05: Setting information error
(FLASH-ROM error)
06: Setting information error
(EE-PROM error)
07: Download error
08: Parity error
09: Over run
10: Framing error
11: LAN timeout error
12: Buffer over
13: Head open
14: Paper end
15: Ribbon end
16: Media error
17: Sensor error
18: Printhead error
19: Cover open error
20: Memory/Card type error
21: Memory/Card read/write error
22: Memory/Card full error
23: Memory/Card no battery error
24: Ribbon saver error
25: Cutter error
26: Cutter sensor error
27: Stacker full error
28: Command error
29: Sensor error at Power-On
30: RFID tag error
31: Interface card error
32: Rewinder error
33: Other error
34: RFID control error
35: Head density error
36: Kanji data error
37: Calendar error
38: Item No error
39: BCC error
40: Cutter cover open error
41: Ribbon rewind non-lock error
42: Communication timeout error
43: Lid latch open error
44: No media error at Power-On
45: SD card access error
46: SD card full error
47: Head lift error
48: Head overheat error
49: SNTP time correction error
50: CRC error
51: Cutter motor error
52: WLAN module error
53: Scanner reading error
54: Scanner checking error
55: Scanner connection error
56: BluetoothModuleerror
57: EAP authentication error(EAP failed)
58: EAP authentication error(Time out)
59: Battery error
60: Low Battery error
61: Low Battery error (Charging)
62: Battery not installed error
63: Battery temperature error
64: Battery deterioration error
65: Motor temperature error
66: Inside chassis temperature error
67: Jam error