Return Status Of Status 3 - SATO CL4NX Programming Reference Manual

2.2.1 Return status of status 3

The printer returns the printer's status and reply as the status by receiving 3 types of request commands and print command with this
communication protocol.
The details of each request command and return status are as follows.
1) Status request command
The printer returns the job ID number of receive data that is currently printing, the printer status and the number of remaining labels to print
to the host by receiving this command. When the print is completed or when there is no receive data, the printer returns print quantity of all
"0" (HEX 30H). If the command Job ID Number <ID> is not specified, the ID number returns space (HEX 20H).
Avoid sending ENQ while sending the print data (STX <A> - <Z> ETX). This may cause return status error or print error.
(1) Command ENQ (HEX 05H)
(2) Return status format
When Legacy Status setting for Port 3 is invalid 0
STX ID number
1byte 5bytes
02H
When Legacy Status setting for Port 3 is invalid
Size STX
4bytes 1byte
0000000BH
Status No. of remaining labels
1byte 6bytes
From 000000 to 999999
Set the job ID number by specifying the job ID number <ID> specified
between ESC <A> and ESC <Z>.
If there are several received data items, Set the job ID number of the
received data item that is currently being printed.
ID number Status
5bytes 1byte
Set the job ID number by specifying the job ID number <ID> specified
between ESC <A> and ESC <Z>.
If there are several received data items, Set the job ID number of the
received data item that is currently being printed.
STX (HEX 02H)
ETX (HEX 03H)
ETX
1byte
03H
(Total:11 bytes)
No. of remaining labels
6bytes
From 000000 to 999999
489
ETX
1byte
(Total:15bytes)