SATO CL4NX Programming Reference Manual page 324

Coding examples of the standard format (three-character parameter identifier)
[Coding example 1]
When data is written in an arbitrary length in the EPC region in the IC chip manufacturer extension specifications tag
<A>
<V>50<H>50<XM>SECURE RFID EPC DATA WRITE
<IP0>e:h,epc:01234567890123456789012345678901; (in digits that are multiples of 4)
<Q>1
<Z>
[Coding example 2]
When EPC and user memory are written in a batch in the IC chip manufacturer extension specifications tag, and
permanent locking is performed
<A>
<V>50<H>50<XM>SECURE RFID EPC & USER DATA WRITE
<IP0>e:h,epc:01234567890123456789012345678901,usr:012345678.........5676789012345678901,lck:10001;
<Q>1
<Z>
[Coding example 3]
When data is written in EPC by specifying the SSCC96 standard code conversion in the Gen2 tag, and permanent
locking is performed
<A>
<V>50<H>50<XM>SECURE RFID SSCC96 DATA WRITE
<IP0>e:h,enc:a,flt:0,com:12345678,srl:012345678,lck:00001;
<Q>1
<Z>
[Coding example 4]
When data is written in EPC by specifying the SGTIN96 standard code conversion in the Gen2 tag
<A>
<V>50<H>50<XM>SECURE RFID SGTIN96 DATA WRITE
<IP0>e:h,enc:c,flt:0,com:123456,itm:0123456,srl:012345678901;
<Q>1
<Z>
316