Esc+Bt Barcode Ratio Registration - SATO CL4NX Programming Reference Manual

9.5 Barcode
9.5

ESC+BT Barcode Ratio Registration

Barcode Ratio Registration
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies the ratio of the narrow bar in regard to the wide bar
[Format]
<BT>abbccddee
● Parameter
a [Barcode type] =
b [Narrow space] =
c [Wide space] =
d [Narrow bar] =
e [Wide bar] =
[Coding Example] Barcode type: CODE39, Narrow space: 03, Wide space: 05,
Narrow bar: 03, Wide bar: 05
<A>
<BT>103050305
<V>100<H>200<BW>01233*ABCD*
<Q>2
<Z>
[Supplementary Explanation]
1. To print barcode with specified ratio, insert "Barcode print by specified ratio" command <BW> after this command.
2. When <BW> and the Print Quantity <Q> command are not specified, only the registration of bar width ratio of narrow
and wide bars will be performed.
3. Only one ratio can be registered.
4. If the data other than specified is set, this will not be registered due to command error.
5. Matrix 2of5 is expressed as Coop2of5/NEC2of5.
BT Parameter
<42> <54> abbccddee
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
0 : CODABAR (NW-7)
1 : CODE39
2 : ITF
5 : Industrial 2of5
6 : Matrix 2of5
Valid range : 01 to 99 dots
Valid range : 01 to 99 dots
Valid range : 01 to 99 dots
Valid range : 01 to 99 dots
133
ESC+BT