Esc+K8 16X16 Dots Kanji In Horizontal Line With 1-Byte Character - SATO CL4NX Programming Reference Manual
Hide thumbs
Also See for CL4NX:
- Operator's manual (807 pages) ,
- Programming reference manual (756 pages) ,
- Service manual (160 pages)
Table of Contents
Advertisement
8.28 Font
8.28
ESC+K8 16x16 dots Kanji in Horizontal Line
16x16 dots Kanji in Horizontal Line
with 1-byte Character
with 1-byte Character
ESC
Hexadecimal
code
<1B>
16
Initial value
Nil
When the power switch is OFF
Valid range and
term of
Valid range within items
command
Valid range between items
[Function]
Specifies 16x16 (width x height) dot horizontal written Kanji character print and W8 x H16 dots half size character in
horizontal line.
[Format]
<K8>an~n
● Parameter
a [Kanji selection mode]
n [Data]
[Coding example] Shift JIS HEX code characters, Data: 株式会社ｻﾄ-
<A>
<V>100<H>200<P>2<L>0305
<K8>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
[Notes]
1. With the highlighting function the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
3. This command is only available for Shift JIS kanji code and Unicode.
4. For the half size character (one byte character code), printing will be performed in W8 x H16 dots.
5. For the full size character (two byte character code), printing will be performed in W16 x H16 dots.
[Valid Command]
<V>
Print position
Modification
<P>
K8
Parameter
<4B>
<38>
an~n
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
=
H: HEX character
B: Binary code
I:
HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
=Refer to the code table (Shift JIS, Unicode).
=
Kanji Code 4bytes ASCII / 1 Kanji character
=
Kanji Code 2bytes / 1 Kanji character
=
Horizontal/vertical valid range:
=
Horizontal/vertical valid range:
<H>
<L>
<%>
<&>
99
ESC+K8
factor 3 to 12
factor 1 to 5
<WD>
</>
<0>
Advertisement
Table of Contents
