Esc+Tm Trademark Print(Uhf) - SATO CL4NX Programming Reference Manual

16.4 RFID
16.4

ESC+TM Trademark Print(UHF)

Trademark Print(UHF)
Command ESC
HEX code <1B>
16
Default Value Nil
When turning off the power switch
Valid range and
term of Valid range within item
command
Valid range between items
[Function]
This command specifies the printing of the trade mark in the tag label.
[Format]
<TM>a
●Parameter
a = [Logo number]
1:
2:
[Coding example 1]
<A>
<V>50<H>50<TM>1
<Z>
[Valid command]
Modification
command
[Supplemental explanation]
1. The specification of coordinates <V><H>, rotation <%>, and magnification <L> is enabled.
2. To perform magnification <L>, the command must be specified immediately before the trade mark print command
<TM>.
3. The image size of trade mark is (Image 1: W143XH101 dots, Image 2: 202 XH101 dots). (when magnification is
not specified)
TM Parameter
<54> <4D> a
16 16
<V> <H> <L>
327
ESC+TM
The set parameter is maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
[Coding example 2]
<A>
<V>50<H>50<TM>2
<Z>
<%>