Timing Chart - SATO CL4NX Programming Reference Manual

3.6.3 Timing chart

1) Normal process
Power On
Printer
Initializing
SD
RD
Printer Status
Note: Avoid sending ENQ while sending the print data (STX <A> - <Z> ETX).
2) Cancel process
Printer
RD
Status
SD
Printer Status
Note: When the cancel request command has sent, wait more than 500 ms before sending the next data.
Receive buffer near full state
STX.ETX (1)
Status Status
Online
Printing (1)
This may cause return status error or there may be print error.
STX.ETX (1)
Status
Online
Receive/Analysis/Edit (1)
Avoid sending CAN while sending the print data (STX <A> - <Z> ETX). With the above condition, the job may not
be canceled or the item may not be printed correctly.
Receive buffer near full release
STX.ETX (2)
Status
Receive/Analysis/Edit (2)
Printing (2)
Status
500 msec
Printing (1)
Press the LINE button
STX..ETX (3)
Status
Receive/Analysis/Edit (3)
STX.ETX (2)
Status
Receive/Analysis/Edit (2)
Printing (2)
Press the LINE button
Status
Offline
Printing (3)