Esc+Bq Qr Code (Compatible Commands) - SATO CL4NX Programming Reference Manual

10.10 2D code
10.10
ESC+BQ
QR Code(Compatible Commands)
Commands)
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying QR code.
[Format]
[Manual setup] <BQ>abcc,(ddeeff,)g(hhhh)n
[Auto setup] <BQ>abcc,(ddeeff,)0n
●Parameter
a [Error correction level]
b [Concatenation mode]
c [Size of one side of cell]
e.g.)cc=04
d [No. of partitions by concatenation mode]
e [Sequential number partitioned by concatenation mode] =
f [Concatenation mode parity data]
g [Character mode]
h [No. of data]
n [Print data]
[Coding Example]Error correction level: 30%, Concatenation mode: Normal, Size of one side of cell: 10
<A>
<V>100<H>200<BQ>3010,112345
<Q>2
<Z>
[Supplementary Explanation]
1. Carry out XOR logic operation of all the partitioned print data of the QR code and then, specify this operation data in
hexadecimal character. This is what we call [Parity data].
2. When character mode is set to other than binary mode, it is not necessary to set data number parameter.
3. This command is for existing models. Using <2D31> is recommended.
QR Code (Compatible
BQ
<42> <51>
16 16
= 1 : 7% High density level (L)
2 : 15% Standard level (M)
3 : 30% High reliability level (H)
4 : 15% High reliability level (Q)
= 0 : Normal mode
1 : Concatenation mode
= Valid Range: 01 to 99(dot)
4 dots
4 dots
211
ESC+BQ
Parameter
Manual setupabcc,(ddeeff,)g(hhhh)n
Auto setup abcc,(ddeeff,)gn
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Feed direction
= Valid range
Valid range
= Valid range
= 0 : Auto setup mode
1 : Number mode
2 : Alphanumeric mode
3 : Binary mode
4 : Kanji mode
= Valid range
= Data
: 01 to 16
: 01 to 16
: 00 to FF
: 0001 to 7366 (dot)