SATO CL4NX Programming Reference Manual page 401

Hide thumbs Also See for CL4NX:

Table of Contents

1. This command allows printing for continuous printing, cutter printing, dispenser printing and tear-off.

2. This command cannot be specified multiple times in between <A>(start of data transmission) through <Z>(end of

data transmission). Neither can it be specified together with <IP0>(EPC code write) command.

3. Contents of sequential printing or calendar cannot be written as information to the tag.

4. The sent information and written information are verified before printing when information is written to tag with this

5. The default value of parameter b is 0 (stop without ignoring tag error).

6. If printing object doesn't exist for the print job that includes this command, printer only writes for RFID and doesn't

feed label. The buzzer will sound 6 times if it fails to write to tag. If successful, the buzzer is sounded 2 times but

does not feed the label. If you want to feed or print as blank label specify 1 for the "fsw: feed without printing" field.

7. Refer to the following chart if you want to specify the alphabet "A" in ASCII/HEX data formats.