SATO CL4NX Programming Reference Manual page 348

Parameters related to passwords to access ICODE (omissible)
Read protect authentication for
aw0:
user memory
Write protect authentication for
aw1:
user memory
Authentication
aw2:
Privacy mode
Authentication
aw4:
protect
Parameters related to setting password for kill command in Tag-it (omissible)
kpw: Kill command password
Parameters related to page protection settings(omissible)
pps: Page protection
Parameters related to feed control (omissible)
fsw:
Feed without printing
(former Fs:)
Authenticates with password to access tags that are read/write protected with
pw0:.
Valid range: 00000000-FFFFFFFF, 8-digit hexadecimal
Authenticates with password to access tags that are write protected with
pw1:.
Valid range: 00000000-FFFFFFFF, 8-digit hexadecimal
to set/reset Authenticates with password to access tags that are in Privacy mode by pw2:.
Valid range: 00000000-FFFFFFFF, 8-digit hexadecimal
to reset EAS
Authenticates with password to access tags that are protected by pw4:.
Valid range: 00000000-FFFFFFFF, 8-digit hexadecimal
Sets password to disable tag. Sets password only. The tag itself is not
disabled.
Valid range: 00000000-FFFFFFFF, 8-digit hexadecimal
Valid range：lllm
lll = Page address(3-digit decimal)
m = Type of condition (refer to the following table)
Switches specified page address from the initial "Public" to other modes.
If individual page addresses are specified, up to 8 sets can be specified per
tag write.
Type of
condition
0
1
2
3
Normally, RFID write print jobs that don't include print data writes but don't
feed label.(Except for cases with tag offset as default)
When 1 is specified for this parameter, even the print jobs that don't include
print data will feed.
When 0 is specified, print jobs that don't include print data will not feed, which
is the same as not specifying fsw:.
Also, printer only writes without feeding or printing when 0 is specified for
print jobs that include print data, which allows write test without having to
waste label.
If don't feed, Short buzzer will sound 2 times when write is successful. Short
buzzer will the sound 6 times when it fails to write.
In addition, if 2 is specified for the item including print data, a write test can be
performed without consuming a label as only write is executed without
feed/print.
Valid range：0-2
340
Mode
Public
Read-protect
Write-protect
Read/Write-protect
Behavior
No authentication mode
(default)
Password authentication
required for read
Password authentication
required for write
Password authentication
required for both read/write