Esc+Gt Bmp File Registration - SATO CL4NX Programming Reference Manual

14.14 Memory Card
14.14

ESC+GT BMP File Registration

BMP File Registration
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between items
[Function]
Specifying the registration of BMP file created by such as Paint Brush of Windows.
[Format]
<GT>aaa,bbbbb,n~n
●Parameter
a [Registration number]
b [Total bytes of BMP file]
n [Data]
[Coding Example]
<A>
<CC>1
<GT>1,12345,<424D00～00>
<Z>
[Supplementary Explanation]
1.Data is sent as binary data (Outputs 8 bits as one character data all at once). In this case, file size of BMP file
becomes the total bytes, and BMP file data becomes data.
2. When [Total bytes of BMP file] is not matching the transfer data, this may cause malfunction.
3. Total bytes are the file size displayed at [Property] and such.
4. BMP file is available in Black/White mode only. In color mode, printing will not be performed due to command error.
Also, this command is not valid for BMP compressed file. Make sure that the file extension is set to [BMP] before
printing.
5. Specify Card Slot for use <CC> prior to <GT> command.
6. The error occurs when unused or the slot which the printer is allocated is specified.
[Note]
Don't power off while accessing the memory. There is no guarantee of data in media if the power is turned off while
accessing the memory.
GT Parameter
<47> <54> aaa,bbbbb,n~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= Valid Range : 1 to 999
= Valid Range : 1 to 99999
Specify the file size of BMP file for total bytes.
= BMP file data
Data is sent as binary data (Outputs 8 bits as one character data all at once)
16
297
ESC+GT