Esc+C Reprint - SATO CL4NX Programming Reference Manual

12.14 System
12.14

ESC+C Reprint

Reprint
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies to reprint the last label
[Format]
<C>
[Coding Example]
<A>
<C>
<Z>
[Supplementary Explanation]
1. Since the last print data will be cleared by powering off, reprint operation will not be available after the printer
booted.
2. The forced tear-off command <TK> and eject cut command <~B> doesn't execute reprinting.
[Note]
In case the print data contains sequential numbering by command <F>, the same number will be printed.
C Parameter
<43> Nil
16
The set command is not maintained.
The set command becomes invalid.
The set command becomes invalid.
264
ESC+C