SATO CL4NX Programming Reference Manual page 387

Specification to record RFID data log
1. For logging RFID data, select "Data To Record" and "Log RFID Data" from "Interfaces"->"RFID" section.
2. If RFID data log(Log RFID Data) is enabled, the buffer (the storage area for 100 logs to store UID) will be saved in
printercluded. printer's RAM. When the buffer is filled with logs, the new log data will overwrite from the oldest log.
3. When RFID data log (Log RFID Data) is enabled, the log data is returned in chronological order when it receives
[DC2] PK. After the log data returns, the buffer is thoroughly cleared.
4. When RFID data log (Log RFID Data) is disabled, it returns 1 log. It doesn't get cleared after the data is returned
with [DC2] PK.
5. If the printer is powered off, all log data will be lost.
6. When <RU>,00 is set, the whole log buffer will be cleared.
7. No log is recorded when code write is specified without print data.
[Format of [DC2]PK return data when RFID data log is enabled (normal state)]
Return 1' (31h) if tag is successful.
Return 0' (30h) if tag is failed.
Status =
Error symbol= rror symbol=or
[STX]xxxxx,
1,N,UD:044C8000000315
02
h
1,N,UD:044C800000032A
...
...
[ETX]
03
h
1: Print with tag write successful
'D' : UID read error
'A' : All errors
0:Tag write failed and write with tag error
379
Total number of data byte
Return UID.
Return error that shows the character