Handover Mode - SATO CL4NX Programming Reference Manual

Hide thumbs Also See for CL4NX:

Table of Contents

Handover mode

This mode works when printer'spower is turned on. It reads the handover information (Bluetooth, WiFi connection) from NFC

tag memory that is written on NFC tag memory at power off, and communicates with printer based on that information by

connecting to Bluetooth or Wi-Fi.

Purpose: For sending SBPL data (printing), printer setup, collecting values and status.

Note: The communication after handover connection is done through Bluetooth or Wi-Fi.

For data format and transmission sequence, see Chapter 7. Bluetooth and Chapter 6. WLAN.

Data transmission