Connector Pin Assignment - SATO CL4NX Programming Reference Manual

8.2

Connector Pin Assignment

14-pin external signal interface
Pin
Signal name
No
1 Paper end*6
2 GND
3 Ribbon end*6
4 Machine error
Print start signal
5
(PRIN)
Print completion
6 signal
(PREND)*1, *2
Reprint signal
7
(PRIN2)
8 EXT 5V_IN *3
9 Offline *4
10 Ribbon near end
11 -
12 +24V
13 +5V
14 -
Dispenser
－
completion waiting
signal *5,*6
－
Label near end
*1 Select TYPE I-TYPE IV for No.6 pin "PREND" output signal. For details, refer to external signal type in 8.1Basic
specification.
*2 No. 6 pin "PREND" output signal is not output when "0" is specified as number of cuts for cut unit number command in
cutter operation.
*3 When SW14 on IF board is set to 2-3, the printer operates by power supply from EXT5V_IN(No. 8 pin). When set to 1-2
side, the printer operates by internal power supply (Set to 1-2 side as shipment settings) .
*4 When SW15 on IF board is set to 2-3, the no.9 pin operates as offline output. When set to 1-2 side, the printer operates as
input (Set to 2-3 as shipment settings).
*5 Output pin no. can be set for Waiting for dispenser completion and label near end from Extio Signals from settings on
GUI.Default: "Unspecified".
*6 Output timing of print end signal (PREND) is changed when Wait signal for dispenser is set to valid. Please refer to
[[3]Output waiting for dispenser] of [8.3I/O signal] for details.
Description
Output at paper end detection.
SIGNAL GROUND
Output at ribbon end detection.
Output with head open, head error,
communication error and so on.
The printer issues one label by input of
this signal.
Signal is output at the operation of the
printer issues one label.
By input of this signal, the printer reprints
the same contents for one time.
For power supply from peripherals.
Output when the printer is in the online
state.
Output at ribbon near end detection.
-
-
-
-
Signal is output during dispenser
completion waiting
Output when detect label near end
Input/Output
Open
collector
output
-
Open
collector
output
Open
collector
output
Input
Open
collector
output
Input
Input
Open
collector
output
Open
collector
output
-
-
-
-
Open
collector
output
Open
collector
output
579
Electrical conditions
Level (Voltage, Current
(MAX))
Withstand pressure
Low 50 V
Sink current 50 mA
- -
Withstand pressure
Low 50 V
Sink current 50 mA
Withstand pressure
Low 50 V
Sink current 50 mA
High: high
impedance
Low
Low: more than
-15mA, 0V
Withstand pressure
Low 50 V
Sink current 50 mA
High: high
impedance
Low
Low: more than
-15mA, 0V
- 5V
Withstand pressure
Low 50 V
Sink current 50 mA
Withstand pressure
High 50 V
Sink current 50 mA
- -
- 2A
- 500mA
- -
Withstand pressure
Low 50 V
Sink current 50 mA
High 50V
50mA