Common Commands For All Languages - SATO CL4NX Programming Reference Manual

17 Common Commands for All Languages

The common commands are the commands independent from the applications such as SBPL,
SZPL, SIPL.
The common specifications of the common command for all languages will be described as
follows.
1. The structure begins from [DC2]<12>16 and two characters follow it.
2. When the two characters follow [DC2] are not the common commands, nothing will be returned and the data after
that will be ignored.
3. The command to specify the data size will wait the data until the data size satisfies the specified size and no data will
be returned.
4. When initializing the printer, turning the printer's power off and updating the printer, [NAK]<15><16> will be returned.
However, the cancel request command can be received.
5. It runs after resuming from power-save mode when the printer is in power-saving mode or resuming from
power-save mode, and returns [ACK]<06>16 or [NAK]<15>16. However, the reset command and the power off
command and the cancel request command can be received.
6. The common commands cannot be used when the printer is set to the non-standard mode.
402