SATO CL4NX Programming Reference Manual page 185

Hide thumbs Also See for CL4NX:

Table of Contents

[Coding Example2]Error correction level: 7%, Size of one side of cell: 04

Mixed specification of Manual setup (Data setup mode)

In Manual setup, you can proceed specifying data in specified input mode (Numeric, Alphanumeric, Kanji, Binary) in a

<V>100<H>200

<2D32>,L,04,0

<DN>0010,0123456789

[Supplementary Explanation3]

1. Parameter part to be followed by Data part. Data part and data part should be specified in a row. When don't specify

in arow, print result may not be secured.

Micro QR Code Data size list

(Error detection only)

[Coding Example 3] Error correction level: 7%, Size of one side of cell: 05, Data setup mode: Manual setup,

Concatenation mode: Normal, Version M4, Data setting mode: manual setting,

Combine mode: normal, Printed in version M4

<V>100<H>200<2D32>,L,05,0,0

<DS>1,012345

<DN>0004,6789

1. Specify <QV> command between <2Dxx> and <DN>/<DS>.

2. When resulted in a parameter error, it will be handled in the same manner of no specification.

3. It doesn't become a parameter error from 3.00 to 40. (Set the value within the range corresponding to each model)

For MicroQR, the setting range is from 00 to 04.

4. Sending the data exceeding the data size of specified version will result in error and QR code is not printed.

Error correction

Alphanumeric